Everything about Microspheres
RSS feed
  • Porous Ceramics: Application for Polyethylene Microspheres

    Background:

    Usually porous ceramics are made from aluminum oxide, silicon carbide or Zirconia.  Most porous ceramics have a natural ability to fill pores by capillary action. This makes porous ceramics water accepting, thus they also are referred to as hydrophilic material. This means the pores and channels of a ceramic have a highly charged pore surface that attracts and bonds the polar molecules of water and other polar fluids. The net effect is called “wicking” — the ability to pull fluids into the material and transport that fluid by capillary forces.  The pore size directly affects the ceramic’s air entry or bubbling pressure and hydraulic conductivity. The effective pore size is determined by the minimum orifice within a channel or pore.1

    Some porous ceramic have 40-50% open porosity with a tortuous pore structure and is available in pore sizes ranging from 0.25 to 90 microns. Monolithic, single grade, aluminum oxide porous ceramic is available in 6, 15, 30, 50, 60 and 90 micron pore sizes. In addition, some ceramic membranes can use a medium pore substrate with a thin coating of fine porous ceramic membrane in 0.25, 1, 3 and 6 micron pore sizes.2 Continue reading “Porous Ceramics: Application for Polyethylene Microspheres” »